Olympus FE-160 Manuale Utente

54

Get

ting t

o

 know your camera bet

te

r

5

• If you use a non-Olympus card or a card used for another application, such as 

for a computer, the message [CARD ERROR] is displayed. To use this card 
with this camera, use the [FORMAT] function to format the card.

g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P.23)

This camera uses several lamps to indicate the camera status.

• Doing any of the following operations when not actually taking pictures can 

deplete the battery power.

• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom

• To save battery power, turn off the camera whenever it is not in use.

Lamp

Status

Power/Card access 
lamp

Lit red: Camera turned on with shooting mode.
Lit green: Camera turned on with playback mode.
Off: Power is off.
Blinking in red: A picture is being recorded, the camera is 
reading a movie, or images are being downloaded (when 
connected to a computer).
• Do not do any of the following while the Power/Card 

access lamp is blinking. Doing so may prevent the image 
data from being saved and render the internal memory or 
card unusable.

• Open the battery compartment/card cover.
• Remove the battery.
• Connect or disconnect the AC adapter.

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

Green lamp on the 
monitor

Lit: The focus and exposure are locked.
Blinking: The focus and exposure are not locked.
• Release your finger from the shutter button, re-position 

the AF target mark on the subject and press the shutter 
button halfway again.