Netgear FVS318N – Prosafe Wireless N VPN Firewall Guida All'Installazione Rapida
Initial Access and Basic IPv4 Internet Configuration
14
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4.
Click Apply to save your changes.
5.
Click Test to evaluate your entries. The wireless VPN firewall attempts to make a connection
according to the settings that you entered.
6.
To verify the connection, click the Broadband Status option arrow in the upper right of the
screen to display the Connection Status pop-up screen (the following screen contains an
example):
Figure 16.
IPv4 Connection Troubleshooting Tips
If your wireless VPN firewall is unable to access the Internet, you should first determine
whether the wireless VPN firewall is able to obtain a WAN IPv4 address from the ISP. Unless
you have been assigned a static IP address, your wireless VPN firewall requests an IP
address from the ISP. You can determine whether the request was successful using the web
management interface.
whether the wireless VPN firewall is able to obtain a WAN IPv4 address from the ISP. Unless
you have been assigned a static IP address, your wireless VPN firewall requests an IP
address from the ISP. You can determine whether the request was successful using the web
management interface.
To check the WAN IP address:
1.
Launch your browser and navigate to an external site such as www.netgear.com.
2.
Access the web management interface of the wireless VPN firewall’s configuration at
https://192.168.1.1.
3.
Select Network Configuration > WAN Settings > Broadband ISP Settings. The
Broadband ISP Settings screen for IPv4 displays.
4.
Click the Broadband Status option arrow. The Connection Status pop-up screen for IPv4
displays.
My IP Address
The IP address assigned by the ISP to make the connection with the ISP
server.
server.
Server IP Address The IP address of the PPTP server.
Table 8. PPTP settings (continued)
#
Setting
Description