Netgear RN212 – 2 BAY Desktop ReadyNAS Storage Manuale Hardware

The Power LED indicates these states:

On. Powered on.

Off. Powered off.

Power LED

The eSATA LED indicates these states:

On. The SATA link is established between the EDA 500 and a host.

Off. The SATA link is not established.

eSATA LED

The Volume LED indicates these states:

On. The data volume or volumes are mounted by a host.

Off. The data volume or volumes are not mounted. You can safely disconnect
the eSATA cable.

Volume LED

The Alert LED indicates these states:

On. The system needs attention. Use the local admin page to determine the
problem. For more information, see the ReadyNAS OS 6 Software Manual,
which is available at 

.

Off. The system is healthy.

Alert LED

A disk LED next to each active drive bay indicates the status of the disk inside.

(The cold spare drive bay has no LED.) The disk LEDs indicate these states:

Solid blue. Power is on and the disk is operating normally.

Blinking blue. The disk is active.

Solid red. The disk was removed, failed, or is resynchronizing. See the display
screen for details.

Off. No disk is present.

Disk LEDs

This section describes how to power on and shut down your system. If you must shut down the system, use
the preferred shutdown method whenever possible.

When the system is connected to a power supply and the Power switch is in the On position, the system
automatically powers on.