Netgear RN212 – 2 BAY Desktop ReadyNAS Storage Manuale Hardware
Disk Trays
All systems except the EDA 500 use standard disk trays. The EDA 500 comes with its own special disk
trays. This section describes both the standard and EDA 500 disk trays.
trays. This section describes both the standard and EDA 500 disk trays.
Standard Disk Tray
The following figure shows the features of the standard disk tray. This disk tray is used in all systems except
the EDA 500. For information about the EDA 500 disk tray, see
the EDA 500. For information about the EDA 500 disk tray, see
on page 117.
Figure 43. Standard disk tray
1.
Disk tray
2.
Disk tray release latch
3.
Recessed disk tray handle lock
4.
Disk tray handle
5.
Disk screw holes
6.
Mounting bracket
7.
Bracket lock
IMPORTANT:
To maintain adequate airflow, make sure that all disk trays remain in the drive
bays, even if no disk is installed in the tray. Do not use standard disk trays
with the EDA 500. Use only EDA 500 disk trays with the EDA 500.
bays, even if no disk is installed in the tray. Do not use standard disk trays
with the EDA 500. Use only EDA 500 disk trays with the EDA 500.
Disks
116
ReadyNAS OS 6.5