KitchenAid 36" Island-Mount Canopy Hood Utilizzo E Cura

1. Remove the plastic covering from the chimney covers.

2. Discard the upper chimney cover supplied with the hood.

3. Slide the chimney cover provided with the extension kit over 

the chimney support and extension frame and secure to the 
top of the extension frame using the 2 screws provided.

4. Slide lower chimney cover over the chimney support and 

extension chimney cover and attach to the bottom of the 
support using the 2 screws provided.

1. Lift the hood up against the chimney support and attach the 

canopy to the support with 4 bolts provided. Tighten bolts 
securely.

2. From the underside of the hood, plug control cables together 

as shown.

3. Insert each connected cable into a black plastic connector 

box half.

4. Place the top half of the connector box on each and screw 

the 2 halves together using the 4 screws provided for each 
connector box.

5. Using the 2 longer screws provided for each box, attach the 

assembled connector boxes to the metal flange.

NOTE: For recirculating installations only, install charcoal filter 
from Recirculating Kit behind the center grease filter by inserting 
and locking it into place. See “Range Hood Care” section.

6. Install grease filters using 2 hands by first pulling and turning 

the knob to the left so that the locking lever does not protrude 
from the filter. See “Range Hood Care” section.

7. Reconnect power.

A

A

B

C

A

A

B

C

A

B

B