KitchenAid 36" Island-Mount Canopy Hood Utilizzo E Cura

4. Install the 2 vent extension pieces onto the diverter by gently 

pushing them until they stop.

5. Discard the lower chimney cover shipped with the hood and 

use the cover from the Non-vented (recirculating) Kit 
(purchased separately).

6. Slide the recirculating kit lower chimney cover over the 

chimney support and the upper cover.

Check that the diverter extensions line up with the openings 
in the cover. Attach the cover using the 2 screws provided.

7. Snap vent grills into place.

1. Remove the plastic covering from the chimney covers.

2. Discard the upper chimney cover supplied with the hood.

3. Slide the chimney cover provided with the extension kit over 

the lower chimney support and extension frame and secure 
to the top of the extension frame using the 2 screws 
provided.

4. Slide lower chimney cover over the chimney support and 

extension chimney cover and attach to the bottom of the 
support using the 2 screws provided.

1. Lift the hood up against the chimney support and attach the 

canopy to the support with 4 bolts provided. Tighten bolts 
securely.

2. From the underside of the hood, plug control cables together 

as shown.

3. Insert each connected cable into a black plastic connector 

box half.

A

A

A

A

A

B

C

A