Xerox 4213 MICR MRP Guida Utente
SPECIAL FEATURES
Select translate table
This command causes the specified translate table to become the
active translate table. Before modifying a table, it must be
selected as the active translate table.
active translate table. Before modifying a table, it must be
selected as the active translate table.
Command format:
@Y73,<table number>@
@
The interface escape character
Y73
The command that selects the translate table
, (comma)
The command delimiter
<table
number>
The number that identifies the translate table in
the range 1 to 8.
the range 1 to 8.
@
The interface escape character
Modify translate table
This command is used to modify entries in the active customised
translate table. The modifications become active immediately and
are stored directly in non-volatile memory (NVRAM). Up to eight
characters may be defined for each code point.
translate table. The modifications become active immediately and
are stored directly in non-volatile memory (NVRAM). Up to eight
characters may be defined for each code point.
Command format:
@Y75,<CTT>,<ISO6937>@
@
The interface escape character
Y75
The command that modifies the translate table
, (comma)
The command delimiter
<CTT>
The entry in the active custom translate table
(EBCDIC code page 500)
(EBCDIC code page 500)
, (comma)
The command delimiter
<
ISO6937
>
The entry in the ISO6937 translate table
@
The interface escape character
3–32
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE