Xerox 4215 MICR MRP Guida All'Installazione
CONFIGURING IPDS
—
SET3812.ITX—configuration file to emulate the IBM
3812
3812
•
BINARY ITDS configuration files for default emulation
—
SET4028.IDA—configuration file to emulate the IBM
4028
4028
—
SET3816.IDA—configuration file to emulate the IBM
3816
3816
—
SET3812.IDA—configuration file to emulate the IBM
3812
3812
•
MAKEVB.EXE—IBM mainframe utility and sample JCL that
allows you to upload the IPDS font set and configuration
files from a PC to the host, and then send them from the
host to the printer.
allows you to upload the IPDS font set and configuration
files from a PC to the host, and then send them from the
host to the printer.
Copying the MakeITDS utility files
Prerequisites
Print and review the README.1ST file located on the MakeITDS
utility disk. This file contains the latest information on the
MakeITDS utility.
utility disk. This file contains the latest information on the
MakeITDS utility.
Follow these steps to install the MakeITDS utility:
1.
From the DOS root directory, create a directory called
MAKEITDS to contain the MakeITDS utility files by typing
the following and pressing Enter:
MAKEITDS to contain the MakeITDS utility files by typing
the following and pressing Enter:
MD MAKEITDS
2.
Change to the MAKEITDS directory by typing the following
and pressing Enter:
and pressing Enter:
CD MAKEITDS
3.
Insert the MakeITDS utility disk into the floppy disk drive.
4.
From the MAKEITDS directory, type the following and press
Enter:
Enter:
COPY <floppy drive letter>:*.*
You have copied the compressed program files to the
MAKEITDS directory.
MAKEITDS directory.
5.
To expand the files, type the following and press Enter:
ITDSINST
You have installed the utility files in the MakeITDS directory. The
files are listed in the “MakeITDS utility” section earlier in this
chapter.
files are listed in the “MakeITDS utility” section earlier in this
chapter.
N
Note: The instructions for loading and using MAKEVB.EXE are
described in the “Configuring IPDS from an IBM VM or MVS host
computer” later in this chapter.
described in the “Configuring IPDS from an IBM VM or MVS host
computer” later in this chapter.
Command parameters
You run the MakeITDS utility by executing the MAKEITDS
command. The command has the following syntax:
command. The command has the following syntax:
MAKEITDS [/P] /R infile [/O outfile] [/L logfile] [/H]
Table 3–1 describes the parameters of the MAKEITDS command.
3-2
XEROX MRP FAMILY INTELLIGENT PRINTER DATA STREAM (IPDS)
CONFIGURATION AND REFERENCE GUIDE