Xerox 4215 MICR MRP Guida All'Installazione

NOTICES

Always connect equipment to a properly grounded power source
receptacle.  If in doubt, have the receptacle checked by a
qualified electrician.

WARNING:  Improper connection of the equipment grounding
conductor can result in electrical shock. 

Always place equipment on a floor with adequate strength for
the weight of the machine.

Always have your service representative move or relocate the
equipment.

Always use materials and supplies specifically designed for your
Xerox equipment.

WARNING:  Use of unsuitable materials may result in poor
performance and can possibly create a hazardous condition.

Always use a Xerox specified cordset with the Equipment Leakage
Current Interrupter (ELCI).

Never use an extension cord with the ELCI.

Never use the ELCI where water may enter the casing.

Never attempt any maintenance function that is not specifically
described in your Xerox printer documentation.

Never remove any covers or guards that are fastened with screws
unless otherwise instructed.  There are no operator-serviceable
areas within these covers.

Never override or “cheat” electrical or mechanical devices.

Never operate the equipment if you notice unusual noises or
odors.  Disconnect the power cord from the power source
receptacle and call service to correct the problem.

U.S. only:  If you need any additional safety information
concerning the equipment or if you need Xerox supplied
materials, call the following toll-free number:  1-800-828-6571.

Listed by Underwriters Laboratories (UL), UL1950.  Meets CSA
standards, C22.2 NO 950.

Meets the IEC950 as judged by UL.

Your printer is equipped with an Equipment Leakage Current
Interrupter (ELCI).  This device protects the equipment in the
event of a malfunction.

XEROX 4220/MRP FAMILY INTELLIGENT PRINTER DATA STREAM (IPDS)                   

vii

CONFIGURATION AND REFERENCE GUIDE