Xerox 4215 MICR MRP Guida Utente

This chapter describes configuring the AppleTalk interface option.

You may want to print the Printer Configuration Report to verify
that the AppleTalk interface option is installed correctly.

The report contains the following information:

•

Hardware Status—Displays the AppleTalk interface status.

•

Printer Default Settings System Configuration—Displays
AppleTalk interface configuration settings.

Refer to the “Utilities menu” chapter in the Xerox MRP Family
System Administrator Guide for the procedures to print the
Printer Configuration Report.

The Printer Configuration Report provides information on the
hardware status and the default printer configuration settings for
the AppleTalk interface.

The Hardware Status section of the Printer Configuration Report
contains the following information for AppleTalk:

•

Installed—The AppleTalk interface is installed and working
properly.

•

Not Installed—The AppleTalk interface is not installed.

•

Failed—The AppleTalk interface has failed.

The System Configuration section of the Printer Configuration
Report contains the following default AppleTalk interface setup
settings:

•

AppleTalk interface settings (if this interface is not installed,
“Not Installed” is reported and the following fields are blank):

— Interface enablement—Specifies if the AppleTalk interface

is enabled or disabled.

— Print language selection—Specifies the current print

language selection setting.

•

Interface priority—Specifies if the interface priority is
sequential or priority, and the interface that is high priority:

XEROX MRP FAMILY APPLETALK INTERFACE OPERATOR GUIDE

4-1