Xerox 4215 MICR MRP Guida Dell'Amministratore

<

cut top 2"

cut 1">

DIIIIIIIIHHHHHHHHIIIIIIIIIIIII

4-58

Printing

The Twinax and Coax Interface Configuration
Reports provide information on how the printer
is configured to operate within a twinaxial or
coaxial environment.

The functions listed on the reports refer to
the settings of the FSL (Function Select via
Line) options that are used to control the
specific features of the twinax and coax
emulations.  The use of FSL commands allows you
to select options and features on your 4219/MRP
and 4215/MRP that are not available on the
printers that are emulated.

The use of the FSL commands is documented in
the 

Xerox Twinax Command Reference

 and the

Xerox Coax Command Reference

.

The Firmware version information printed at the
top of the configuration report is useful
information if you need to report a problem to
Xerox

The IPDS - Settings Printout contains the
Firmware Version #, the amount of installed
memory, and whether the installed interface is
twinax or coax.

The IPDS Setup section provides the following
information on how the printer is configured to

XEROX 4219/MRP Mid Range Systems Printer

XEROX 4215/MRP Mid Range Systems Printer