Xerox XCounter Page Accounting Support & Software Guida Utente

XCOUNTER FOR NOVELL USER REFERENCE MANUAL 

 

25 

• 

Load the XPopup on client workstation and send a print a job to this printer. 
Depending on the window type configured, the client popup window will look 
similar to the popup shown below. Please refer to the section “Running 
XPopup” for more information on loading XPopup.exe. 

 

Congratulations, you have now installed XCounter XPopup support. To verify proper 
operation of this program, select this configured printer from within XControl, right 
mouse click and select “XCounter/Print History”. A print history report will be 
displayed that will contain information regarding the print job including the client (and 
if enabled, subcode) information.  

Note: The XCounter program provides numerous printer and server configuration 
options that can be set to meet custom requirements. Please refer to the sections 
“Server Configuration” and “Printer Configuration” for more detailed information on 
these options. 

Once XCounter software has been installed and configured for Standard Page 
Accounting, the client “Charge Back Accounting” method may be implemented if 
required. To install this type of accounting, there must be a client code database 
installed. To install this client database, please refer to the section “Maintaining the 
XPopup database”. Once this client database has been established, the following 
procedure may be used to install and configure the server for the XPopup client: