Xerox Phaser EX7750 Guida All'Installazione

If you want to use sending functions, you may also need to change the WINS 

name server settings specified in the Windows Setup>Service Setup>Network Setup. 
However, setting up the WINS name server is outside the scope of this document. 
For more information about setting up a WINS name server, contact your network 
administrator.

For more information about how to use these features, see the documentation that 
accompanies your printer.

You can send your print job to a Windows server only if you use “Sending 

Methods.” Select Windows (SMB) for a Windows server from the Protocol drop-down 
list on the Send screen. 

When you finish making Setup changes, choose Exit Setup from the main Setup 
menu. The EX7750 restarts. All changes are saved on restart.

IPX/SPX Setup options 

For protocols other than IPX/SPX, the frame type is automatically enabled and does 
not require setup, as follows:

To specify the frame types the EX7750 uses for IPX/SPX protocols, choose 
IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame 
type to enable IPX/SPX protocols. The EX7750 supports the following frame types 
for IPX/SPX:

• For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP

AppleTalk

PAP (Printer Access Protocol)

Ethernet SNAP

TCP/IP with Ethernet

LPD (Line Printer Daemon)

Ethernet II