Xerox Phaser 5500 Guida Utente

Weatherproof paper can be printed from any tray. You can load paper to the fill line in the tray; 
however, the printer has better feed reliability if you load fewer sheets in the tray.

For best results, use only Xerox Phaser Weatherproof Paper specified for your Phaser 5500 
printer. For a complete list of supported paper and other media, see 

Reference/Printing/

Supported Papers 

on the User Documentation CD-ROM. To order weatherproof paper or other 

media, contact your local reseller.

■

Store weatherproof paper flat in the original packaging. 

■

Leave the weatherproof paper in its original packaging until you are ready to use it.

■

Do not store weatherproof paper in extremely dry or humid conditions or extremely hot or 
cold conditions. Storing weatherproof paper in extreme conditions may cause it to jam in 
the system or cause print quality problems.

■

Remove the weatherproof paper from the packaging and allow it to acclimate to the room 
temperature and humidity prior to printing.

■

Do not leave the paper in the system when you are finished printing. This may cause the 
paper to curl and jam the printer.

■

Rotate stock frequently. Long periods of storage in extreme conditions can cause the 
weatherproof paper to curl and jam the printer.

Insert the weatherproof paper into a tray:

■

For single-sided printing: Insert the weatherproof sheets long-edge feed 
(recommended) and facedown into Tray 1 (MPT). Place the top of the page toward 
the front of the printer.

■

For 2-sided printing: Insert the weatherproof sheets long-edge feed (recommended) 
and the side to be printed first faceup into Tray 1 (MPT). Place the top of the page 
toward the front of the printer.

5500-100

MAX