Xerox Phaser 5550 Guida Utente

To specify the tray sequence:

On the control panel, select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Scroll to the desired tray sequence. (If you want to turn off tray switching, select 

.)

Press the OK button to save the changes.

To specify the tray sequence:

Launch your web browser.

Enter your printer’s IP address in the browser’s Address field.

Select Properties.

Select the General folder on the left navigation panel.

Select Printer Defaults.

Select the desired tray sequence from the Tray Sequence drop-down list. (If you want to 
turn off tray switching, select Off.)

Click the Save Changes button at the bottom of the screen.

If you do not want to use tray switching, you can accept the default order of tray selection. The 
default tray contains the paper type and size used for printing jobs unless overwritten by a 
driver selection. When the default tray is empty, or contains a different paper type, you are 
prompted to load the correct paper type in the tray even if another tray contains the correct 
paper type and size for the job.

You can select the default tray by two different methods:

■

The printer’s control panel

■

CentreWare IS

To select a default tray:

Select 

, and then press the OK button.

Select 

, and then press the OK button. 

Select 

, and then press the OK button.

Scroll to the desired tray to use as the default tray. (If you want tray switching enabled, 
select 

.)

Press the OK button to save the change.

The driver overrides the control panel settings and CentreWare IS for tray selection.