Xerox Phaser 750 Guida All'Installazione
PhaserShare Networking Manual
9
Token Ring
5.
When the script is finished, log in as root.
6.
Make an entry into the host’s ARP (Address Resolution Protocol) table defining the
printer’s Printer Name/Token Ring address pair. In general, this requires a command
corresponding to one of the following syntax examples:
printer’s Printer Name/Token Ring address pair. In general, this requires a command
corresponding to one of the following syntax examples:
7.
Turn on the printer.
8.
Use the host spooling system (for example, lpr or lp) to send the file you created in Step
3b to the printer; this stores the Token Ring information in the printer’s internal memory,
where it is retained over a reset or power cycle.
3b to the printer; this stores the Token Ring information in the printer’s internal memory,
where it is retained over a reset or power cycle.
9.
You must reset the printer before the changes take effect. For more information, see
Resetting the Printer on page 41.
Resetting the Printer on page 41.
arp -s printer-name Token-Ring-address (for BSD systems)
or
arp -s ether printer-nam e Token-Ring-address (for System V)
See the documentation for your host system for specifics of this command.