Xerox Phaser 4400 Dépliant
Printer Settings
Phaser™ 4400 Laser Printer
32
Load paper timeout
When the tray selection is set to Automatic but the printer does not have the selected type and size
loaded, the front panel prompts you to load the type and size required in the Multi-Purpose Tray. If you
do not load the requested paper within the load paper timeout, the printer picks paper from the default
tray.
loaded, the front panel prompts you to load the type and size required in the Multi-Purpose Tray. If you
do not load the requested paper within the load paper timeout, the printer picks paper from the default
tray.
To change the load paper timeout from the printer’s front panel:
1.
With
Menus
highlighted, press the OK key.
2.
Scroll to
Printer Setup Menu
by pressing the Up Arrow or Down Arrow key.
3.
Press the OK key.
4.
Scroll to
Set Load Paper Timeout
.
5.
Press the OK key.
6.
Scroll through the list of values until your desired timeout appears. The values (
None
,
1
Minute
,
3 Minutes
,
5 Minutes
, or
10 Minutes
,
1 Hour
or
24 Hours
), indicate the
length of time you want the printer to wait for you to load paper before printing. If you select a
value of
value of
None
, the printer does not wait for paper to be inserted and uses the paper in the default
tray immediately.
7.
Press the OK key.
To change the load paper timeout using CentreWare IS software:
1.
From your printer’s Internet Services home page, click Properties.
2.
On the left side of the Properties page in CentreWare IS, click General and then click Printer
Defaults.
Defaults.
3.
The setting for Load Paper Timeout is under Timeout Settings on the Printer Defaults page.
Select one of the following choices: None, 1 Minute, 3 Minutes, 5 Minutes, or 10 Minutes, 1
Hour or 24 Hours; if you select a value of None, the printer times out immediately.
Select one of the following choices: None, 1 Minute, 3 Minutes, 5 Minutes, or 10 Minutes, 1
Hour or 24 Hours; if you select a value of None, the printer times out immediately.
4.
Click the Save Changes button on the bottom of the page.
Front panel intensity
To make the front panel text more readable, you can adjust the intensity of the front panel’s background
lighting:
lighting:
1.
On the front panel, with
Menus
highlighted, press the OK key.
2.
Scroll to
Printer Setup Menu
by pressing the Up Arrow or Down Arrow key.
3.
Press the OK key.
4.
Scroll to
Set Front Panel Intensity
.
5.
Press the OK key.
6.
Scroll until the desired front panel intensity is displayed. The intensity values range from
0
(no back ground light) to
10
(brightest background light).
7.
Press the OK key.