Xerox Phaser 850 Dépliant
Advanced Features and Troubleshooting Manual
57
Cleaning Phaser 850 Printers
5.
If one or more of the color bars are still missing or are light, repeat the cleaning
sequence.
sequence.
6.
Return the printer to normal operation by scrolling to Exit and pressing Select. The
Ready to Print message appears when the printer is returned to normal operation.
Ready to Print message appears when the printer is returned to normal operation.
7.
If your prints still have color stripe problems after the third cleaning sequence, turn
off the printer for at least 4 hours to allow the ink to solidify. When the printer is
turned back on, it performs a self-cleaning routine that may resolve the problem.
off the printer for at least 4 hours to allow the ink to solidify. When the printer is
turned back on, it performs a self-cleaning routine that may resolve the problem.
8.
If the problems persist, perform two more Eliminate Light Stripes cleaning
procedures.
procedures.
9.
If your prints still have color stripe problems, service may be required.
Note
The second cleaning sequence implements a more extensive cleaning
of the printer, which may take longer for the printer to execute than
the previous cleaning.
of the printer, which may take longer for the printer to execute than
the previous cleaning.