Xerox Phaser 850 Dépliant
60
Phaser 850 Color Printer
Cleaning Phaser 850 Printers
5.
After a short delay during the warm-up period, the printer begins an automatic
sequence of feeding several clean sheets of paper from the media tray selected as the
cleaning page source.
sequence of feeding several clean sheets of paper from the media tray selected as the
cleaning page source.
6.
When the cleaning sequence is complete, inspect the last sheet of paper fed through
the printer. If the printer is not clean, repeat the cleaning sequence.
the printer. If the printer is not clean, repeat the cleaning sequence.
7.
Scroll to Exit; press Select. After a warm-up cycle, the printer returns to normal
operation.
operation.
Note
If the cleaning procedure is cancelled early, there may be a delay before the
printer is ready to perform two-sided printing.
printer is ready to perform two-sided printing.
If the ink smear problem persists:
Refer to the following two procedures for directions on cleaning paper-feed rollers and the
paper-exit path.
paper-exit path.