Xerox DocuTech 6100 Production Publisher Guida Utente

Solutions in Alphabetical Order

DT6180 HandyBook 133

Doors.

5. There are three circuit breakers below the gauge; cb101, cb102, and cb103. Push up on each

breaker handle to reset it.

6.  Close the Electrical Module door.
7.  Power ON using the main power button.
8.  Close the Processor Door.

Power OFF, Then Power ON the Printer

WARNING: Powering OFF the printer will result in the loss of all jobs in the print queue. Under
normal operating conditions, use the DocuSP Controller software to power OFF the machine. If you
power OFF directly from the printer while the Controller is still operating, the Controller will shut
down and you may lose jobs. Immediate shutdown from the printer terminates all processes whether
or not they have been completed.

NOTE: If jobs are currently printing or waiting to print, they should be placed on hold before you power OFF
the printer. You must be logged on as a System Administrator or Trusted User to place a job on hold.

To power OFF the printer:

1. In the DocuSP Print Services window or the DocuSP for DocuTech 2000 Series 61xx window,

select [Printer Manager]. The Printer Manager Window will be displayed.

2. Select [Printer] from the toolbar. A menu will be displayed.
3. Select [Printer Off]. When you select Printer Off, you will be given additional options depending on

the current state of the printer.

NOTE: A confirmation window will appear asking you to confirm the power OFF. After you confirm
the power OFF, the printer will be powered OFF after the completion of currently printing jobs,
processing jobs, and jobs that are waiting for a printer.

Allow a minimum of 15 seconds after you power OFF before you power ON the printer.

To power ON the printer:

4. In the Print Manager window, select [Printer] from the toolbar. A menu will be displayed.
5. Select [Printer On] from the menu.

The printer that your Controller is attached to will be powered ON. This process will happen without a
confirmation window.