Xerox DocuTech 180 HighLight Color System Guida Utente

A print quality problem means that the job was submitted 
successfully, but does not print correctly.
NOTE:  If the Image Quality parameters are changed, you must 
restart or reboot the FreeFlow Print Server software in order for 
the changes to take affect.

NOTE:  The image quality default settings are optimized for the 
printer. If changes have been made, you can restore the factory 
installed defaults by selecting [Defaults]. Selecting [Reset] sets the 
image quality parameters to the most recently applied setting.

The paper path is the route that materials (paper, transparencies, 
labels, and so on) follow through the printer from the feeder trays 
to the stacker bins, sample tray, or purge tray. Paper jams can 
occur at any stage of the paper path. After a paper jam the printer 
stops, and the following happens:
•

If enabled, the Attention light flashes.

•

Messages appear on the print server informing you of the 
paper jam and its location in the printer.

•

Selecting the message displays a printer mimic graphic that 
shows the area of a paper jam and lists instructions for 
clearing the jam.

NOTE:  It is important that you clear the sheets only in the areas 
indicated on the print server.

When printing resumes following a paper jam, there is a slight 
possibility that duplicate sheets may be printed or sheets may be 
missing from a job. For that reason, you should check job integrity 
after the job has been printed.
1. The printer offsets the first sheet printed following a paper jam. 

Locate that sheet in the stack.

2. Check the sheets immediately before and after the offset sheet 

to see if there are any missing or duplicate sheets in the 
output.

NOTE:  A message may appear on the print server screen telling 
you that there is a suspected page delivery error and advising you 
to check the output.