Xerox DocuTech 180 HighLight Color System Guida Utente

•

Predrilled paper: Has holes for use in binders or binder rings. 
Before loading predrilled paper, fan it to remove any loose 
plugs that could cause paper jams.

•

Perforated paper: Has been pierced with one or more rows of 
holes to permit easy tearing or separating into sections. Read 
and follow the instructions on the ream packaging.

•

Precut or full tabs.

•

Carbonless paper: Is paper that is treated or coated to 
produce an image under pressure (without the use of carbon 
paper). After opening, close and seal the original ream 
wrapper to store. Do not leave in paper trays overnight. Read 
and follow the instructions on the ream packaging.

When selecting paper, look for the following:
•

Low moisture content (a paper to moisture ratio below 5.7 
percent). Paper with higher moisture content may curl and 
jam.

•

Smooth surface.

•

Moisture resistant wrapping.

•

No defects such as bent edges or uneven surfaces.

•

Grain runs parallel with the long side of paper.

The graphical user interface (GUI) on the print server enables you 
to interact with the printing system. It contains windows, icons, 
and menus through which you can issue commands and perform 
operator and system administration tasks. 
When the print server is powered on and booted, the FreeFlow 
Print Server home screen displays.