Xerox DocuColor 12 Printer with Fiery EX12 Guida Utente
ACCESSORIES
12–12
DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
12
Adding staples
1
Open the stapler by grasping the cover at the two
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
2
Pull the empty cartridge out by holding the gold
handle at the top tabs and pulling the cartridge
straight out (Figure 11). Dispose of the cartridge
according to local regulations.
handle at the top tabs and pulling the cartridge
straight out (Figure 11). Dispose of the cartridge
according to local regulations.
3
Align the new cartridge so that the bottom white
tabs are on the bottom edge of the metal bracket
and below the black plastic side arms.
tabs are on the bottom edge of the metal bracket
and below the black plastic side arms.
4
Push the cartridge firmly to the back until the
cartridge clicks into place.
cartridge clicks into place.
5
Close the cover by moving it down until it clicks
close.
close.
Figure 10: Opening the stapler
Figure 11: Removing the cartridge