Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
8. If the extensible service application that you use is on a server outside the firewall
of your company, configure proxy server settings. To configure proxy settings, under
Proxy Server, select Use Proxy Server.
Proxy Server, select Use Proxy Server.
a) Next to Proxy Setup, select Some Proxy for All Protocols to use the same settings
for HTTP and HTTPS. Select Different Proxy for Each Protocol to enter separate
server addresses for HTTP and HTTPS.
server addresses for HTTP and HTTPS.
b) Type your HTTP and HTTPS server address and port number.
9. Select Apply.
Digital Certificate
1. Click the Properties tab.
2. Enter the username and password.
2. Enter the username and password.
The default username is admin and password is 1111.
3. Click the Security folder, then the Machine Digital Certificate Management link.
4. Click Create New Certificate. The Machine Digital Certificate Management page
4. Click Create New Certificate. The Machine Digital Certificate Management page
refreshes and displays the Self-Signed Certificate area.
5. Select Continue. The Public Key Size, Issuer, and Days of Validity display.
6. Select Apply.
6. Select Apply.
SSL
1. Click the Properties tab.
2. If necessary, enter the username and password.
2. If necessary, enter the username and password.
The default username is admin and password is 1111.
3. Click the Security folder, then the SSL / TLS Settings link.
4. In the SSL / TLS Settings area, on the HTTP - SSL / TLS Communication line, click
4. In the SSL / TLS Settings area, on the HTTP - SSL / TLS Communication line, click
Enabled.
5. Click Apply.
If changes are made to the SSL settings you may need to:
• Reboot the system.
• Close and reopen the client browser.
• Close and reopen the client browser.
Ports
1. Click the Properties tab.
2. Click the Connectivity folder, then Port Settings.
3. On the SNMP line, click Enabled.
4. On the SMB line, click Enabled.
5. On the FTP Client line, click Enabled.
6. On the SOAP line, click Enabled.
7. Click Apply.
2. Click the Connectivity folder, then Port Settings.
3. On the SNMP line, click Enabled.
4. On the SMB line, click Enabled.
5. On the FTP Client line, click Enabled.
6. On the SOAP line, click Enabled.
7. Click Apply.
If changes were made to the SSL settings you may need to reboot the system.
Xerox
®
Versant
®
80 Press
6-8
System Administration Guide
Using CentreWare Internet Services Settings