Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Remedy
Cause
Fault Code
Empty punch container and then reinstall
it.
it.
Punch container is near full.
140-700
Fault Codes - GBC AdvancedPunch Pro
Fault codes for the GBC AdvancedPunch Pro are displayed on the press User Interface
/ Control Panel.
/ Control Panel.
Remedy
Cause
Fault Code
1.
Open AdvancedPunch Pro front
door and look for a paper jam; refer
to
door and look for a paper jam; refer
to
2.
Remove any paper jam.
3.
Close front door.
Jam is detected in the Advanced-
Punch Pro.
Punch Pro.
040-100
040-101
040-900
040-901
040-101
040-900
040-901
Close front door of the AdvancedPunch Pro.
Front door of the Advanced-
Punch Pro is not closed.
Punch Pro is not closed.
040-300
Install punch die set or fully insert it; close
front door.
front door.
The punch die set is missing or
not fully installed.
not fully installed.
040-940
Install and / or fully insert punch container;
close front door.
close front door.
Punch chip container is missing
or not fully installed.
or not fully installed.
040-941
Empty punch container and then reinstall
it.
it.
Punch chip container is full.
040-942
Empty punch container and then reinstall
it.
it.
Punch chip container is near full.
140-700
Fault Codes - High Capacity Stacker (HCS)
Note
The press configuration can be installed with one or two stacker modules. If the press
includes two HCS modules, the prefix 049 identifies a fault in the first module, and the
prefix 149 identifies a fault in the second module.
includes two HCS modules, the prefix 049 identifies a fault in the first module, and the
prefix 149 identifies a fault in the second module.
This fault code table lists problems and suggested solutions that apply to the High
Capacity Stacker (HCS).
Capacity Stacker (HCS).
Xerox
®
Versant
®
80 Press
14-28
User Guide
Press Problem Solving