Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Note
If paper is torn, check inside the machine and remove it.
5. Return unit 4 to its original position.
6. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
even slightly.
Stapler Faults
Stapler Faults Overview
Follow the procedures provided when the output is not stapled or the staples are bent.
Contact our Customer Support Center if the problem persists after you have tried the
following solutions. Stapler faults on output may look similar to the ones shown in the
following illustration.
Contact our Customer Support Center if the problem persists after you have tried the
following solutions. Stapler faults on output may look similar to the ones shown in the
following illustration.
1.
No staple
2.
Bent staple
3.
One side of staple rising up
4.
Staple bent in reverse direction
5.
Flattened staple
6.
Entire staple rising up
7.
Staple rising up with the center pressed in
If the output is stapled as shown in the figure above, contact our Customer Support
Center.
Center.
24-25
Xerox
®
Versant
®
80 Press
User Guide
Standard Finisher / Booklet Maker Finisher