Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Supply Unit Shipped with finisher/Reorder Quantity
Supply Item
4 staple cartridges (5000 staples per cartridge) and 1 staple
waste container per carton
waste container per carton
Standard Staple Cartridge and
Staple Waste Container
Staple Waste Container
Finisher Module Maintenance Procedures
For detailed instructions on maintaining the Finisher Module, refer to the following
procedures:
procedures:
•
•
•
Standard Finisher Plus Problem Solving
Fault Codes - Standard Finisher Plus
Recommended Solution
Possible Cause
Fault Code
1.
Check for any obstructions or
paper jams in the Finishing
Module and Finishing Transport
paper paths and clear them.
paper jams in the Finishing
Module and Finishing Transport
paper paths and clear them.
2.
If necessary, power Off / On the
press and rescan or resend your
job.
press and rescan or resend your
job.
3.
If the fault persists, contact the
Customer Support Center.
Customer Support Center.
The sensor or exit sensor in the
Finishing Transport did not
switch ON or did not switch OFF
within a specified amount of
time
Finishing Transport did not
switch ON or did not switch OFF
within a specified amount of
time
013-108 to 013-110
1.
Check for any obstructions or
paper jams in the Finishing
Module and Finishing Transport
paper paths and clear them.
paper jams in the Finishing
Module and Finishing Transport
paper paths and clear them.
2.
If necessary, power Off / On the
press and rescan or resend your
job.
press and rescan or resend your
job.
3.
If the fault persists, contact the
Customer Support Center.
Customer Support Center.
Paper jam at the transport
sensor or exit sensor (Finishing
Transport)
sensor or exit sensor (Finishing
Transport)
013-910, 013-911
26-5
Xerox
®
Versant
®
80 Press
User Guide
Standard Finisher Plus