Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
1. Open the Finishing Transport front door.
2. Grasp the green handle 4 and gently pull toward the right.
3. Remove the jammed paper.
4. Check for and remove any jammed paper between the Finishing Transport exit and
4. Check for and remove any jammed paper between the Finishing Transport exit and
the entrance to the attached third-party device.
5. Return the green handle 4 to its original position.
6. Close the Finishing Transport front door.
7. Ensure that the paper jam indication is cleared from the Finishing Transport status
6. Close the Finishing Transport front door.
7. Ensure that the paper jam indication is cleared from the Finishing Transport status
display.
8. Follow the instructions on the press to restart your print job.
Standard Finisher Plus Specifications
Finisher Module Specifications
Specification
Item
• Top Tray: Collated / Uncollated
• Stacker (middle) Tray: Collated / Uncollated (Offset available)
Tray Type
Xerox
®
Versant
®
80 Press
26-12
User Guide
Standard Finisher Plus