Xerox DocuColor 12 Printer with Fiery X12 Guida All'Installazione

—Specify the simulation method to be used.

—This option defines how the Fiery processes RGB jobs. Select 

Output for RGB jobs that you print to the final output device. Select Simulation to 
simulate an output device that is not the device to which you are printing.

—Specify the output profile to use for printing. Additional profiles can 

be created and downloaded to the Fiery with ColorWise Pro Tools. 

—Specify whether to optimize black text and line art. This 

option also minimizes toner use for documents containing both color and black-only 
pages.

When this option is on, black text and line art are printed with black toner only. When 
this option is off, black text and line art are printed using all four colors of toner. 

—When this option is on, black text overprints on colored 

backgrounds. With this option is off, black text knocks out color backgrounds. In 
general, this option should be on. 

—When this option is on, the Fiery uses an internal lookup table 

to print the best equivalents of PANTONE colors. When this option is off, 
PANTONE colors are printed using the CMYK values defined in the originating 
applications. 

When you have finished specifying Setup options, click OK and close the Setup dialog 
box. You are notified that the Server must be restarted for the new settings to take 
effect and given the choice to reboot now or later. If the Command WorkStation is 
running, the connection to the Server is lost and you must log in again when the 
Server has finished restarting.

If you changed the network configuration or other settings affecting Windows NT 4.0 
Workstation, you must reboot Windows NT 4.0 for those changes to take effect.

After you have completed Setup and rebooted the Fiery for the first time, install user 
software for printing on remote workstations as described in Getting Started. To 
confirm the network connection and your Setup, print a test job from a remote 
workstation.