Xerox DocuColor 12 Printer with Matchprint Professional Server Guida Utente
Imation Matchprint™ Professional Server User Guide
Imation Corp. 2001
20
• Patches are read from left to right in a slow, steady manner. The color
patches appear on the screen as they are measured. It should take
approximately 6 to 8 seconds to completely scan one row.
approximately 6 to 8 seconds to completely scan one row.
• If you move too slowly or too rapidly, patches are not read correctly.
Within the calibrate dialog an X appears on any patch that is miss-read. If
this happens, reposition the device on the first patch of that row and
touch the sensor to start the patch reading of that row again. The
Instruction box at the top of the window will indicate any action you must
take regarding measurement readings.
this happens, reposition the device on the first patch of that row and
touch the sensor to start the patch reading of that row again. The
Instruction box at the top of the window will indicate any action you must
take regarding measurement readings.
To read the last two rows, you will need to move the test form up so the
Spectrocam rests on the black scanner plate.
Spectrocam rests on the black scanner plate.
Note: The system times out after 10 minutes of inactivity. Instructions
appear directing the user to restart calibration.
appear directing the user to restart calibration.
If the calibration is successful, the following message appears: "The calibration
process was successful. You may now calibrate another media."
process was successful. You may now calibrate another media."
4. Click on OK to return to the calibration window.