Honeywell UV Treatment System (UV100) Manuale Proprietario

69-1589

® U.S. Registered Trademark
Copyright © 2002 Honeywell •  All Rights Reserved 

The UC100C Ultraviolet Air Treatment System Replacement 

Lamp is for use with the UV100C Ultraviolet Air Treatment 
System.

1. Read these instructions carefully. Failure to follow them 

could damage the product or cause a hazardous condi-
tion.

2. Check the rating given in the instructions and on the 

product to make sure the product is suitable for your 
application.

3. Removal and replacement of the ultraviolet lamps can 

easily be done by the owner following these instruc-
tions. The owner can also call an experienced service 

technician.

4. After installation is complete, check out product opera-

tion as provided in these instructions.

Disconnect power supply before replacing ultraviolet 

lamp(s).
Do not open lamp knob; there are no user-serviceable 

components inside.

Never look at the lamps while illuminated.
Only view illumination by way of the light indicator 

located on the lamp knob.
To prevent exposure to ultraviolet light, disconnect 

power to the ultraviolet air treatment system before 

servicing any part of the heating/air conditioning 
system.

 

Disconnect power and wait 15 minutes before 

removing the ultraviolet lamp(s).

Can cause personal injury.
Be careful when inserting lamp(s) into lamp base.

Wear protective gloves when handling lamp(s).