Zanussi ZBT23420SA Manuale Utente

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

Disconnect the plug from the mains socket.
1. Remove the screw from the lamp cover.

2. Remove the lamp cover (refer to the

illustration).

3. Replace the used lamp with a new lamp of

the same power and specifically designed

for household appliances (the maximum

power is shown on the lamp cover).

4. Install the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door.

Make sure that the light comes on.

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Dimensions of the recess

 

 

Height

mm

1446

Width

mm

560

Depth

mm

550

Rising time

Hours

20

Voltage

Volts

230 - 240

Frequency

Hz

50

The technical information are situated in the

rating plate, on the external or internal side of

the appliance and in the energy label.

Refer to Safety chapters.

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C