Remington AC 5000 Manuale Utente

Pagina di 71
 
2
SAFETY CAUTIONS
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION OF A 
RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL OPERATING 
CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN ELECTRICIAN 
FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM. 
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR OTHER 
VESSELS CONTAINING WATER OR OTHER LIQUIDS.
 This product is not suitable for use in bath or shower.
THE HAIRDRYER SHOULD BE UNPLUGGED FROM MAINS SUPPLY WHEN NOT 
IN USE.
   Do not leave the dryer unattended when switched on.
   Allow the dryer to cool down before storage.
   Do not immerse in water or other liquids.
   Do not wrap the cord around the unit. Check cord regularly for any sign of damage. Damaged 
cords can be dangerous.
   In use, take care that the inlet and outlet grilles are not blocked in any way as this will cause the 
unit to automatically stop. Should this occur, switch off and allow the unit to cool down. Ensure 
the inlet grille is free from obstructions such as household fluff, loose hair etc.
   Do not place hairdryer on soft material e.g. carpet, bedding, towels, rugs etc.
   Do not leave the dryer switched on when you set it down.
   Always ensure the voltage to be used corresponds to the voltage stated on the unit.
   Do not direct the airflow towards the eyes or other sensitive areas.
   Keep this product out of reach of children. The use of this appliance by persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge can 
give cause to hazards. Persons responsible for their safety should give explicit instructions 
or supervise the use of the appliance.
   Do not use any attachments with this hairdryer, other than those supplied by Remington
®
.
   Avoid allowing any part of the hairdryer to contact the face, neck or scalp.
   If the supply cord of this unit becomes damaged, discontinue use immediately and return the 
appliance to your nearest authorised Remington
®
 service dealer for repair or replacement in 
order to avoid a hazard.
   Special tools are required for any examination, adjustment or repair. Unqualified repair work 
could lead to hazardous conditions for the user.
   We do not accept responsibility for damage to the product, persons or other item(s), caused by 
misuse, abuse or non-compliance with these instructions.
ENGLISH
090190_REM_IFU_AC5000_22L.indd   2
19:36:02|17.04.09 Guido Krölls