Zigmund & Shtain K 002.61 X Manuale Utente

Carefully read the following important information regarding 

installation safety and maintenance. Keep this information 

booklet accessible for further consultations. The appliance 

has been designed for use in the ducting version (air exhaust 

to the outside - Fig.3A), filtering version (air circulation on the 

inside - Fig.3B) or with external motor (Fig.3C).

1. Take care when the cooker hood is operating simultane-

ously with an open fireplace or burner that depend on the air 

in the environment and are supplied by other than electrical 

energy, as the cooker hood removes the air from the environ-

ment which a burner or fireplace need for combustion. The 

negative pressure in the environment must not exceed 4Pa 

(4x10-5 bar). Provide adequate ventilation in the environment 

for a safe operation of the cooker hood. Follow the local laws 

applicable for external air evacuation.

- Control the data plate (positioned inside the appliance) 

to ascertain that the voltage and power correspond to the 

network and the socket is suitable. If in doubt ask a qualified 

electrician.

- If the power supply cable is damaged, it must be replaced 

with another cable or a special assembly, which may be 

obtained direct from the manufacturer or from the Technical 

Assistance Centre.

- This device must be connected to the supply network 

through either a plug fused 3A or hardwired to a 2 fase spur 

protected by 3A fuse.

- 4 -