Cisco Cisco PVC300 Pan Tilt Optical Zoom Internet Camera Manuale Di Manutenzione

Configuring Camera Applications

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE

54

option to enable passive mode FTP and allow data transmission to pass 
through the firewall.

To verify if the FTP settings are correctly configured, click Test. The result will be 
shown in a pop-up window. If it works, you will also receive a test.txt file on the 
FTP server.

HTTP—Select to send the media to a HTTP server when a trigger is activated.

•

URL—Enter the URL of the HTTP server.

•

User name—Enter the user name.

•

Password—Enter the password.

To verify if the HTTP settings are correctly configured, click Test. The result will be 
shown in a pop-up window. If it works, you will also receive a test.txt file on the 
HTTP server.

Network storage—Select to send the media to a network storage when a trigger 
is activated.

•

Network storage location—Enter the path of the network storage.

•

Workgroup—Enter the workgroup for network storage.

•

User name—Enter the user name.

•

Password—Enter the password.

To verify if the network storage settings are correctly configured, click Test. The 
result will be shown in a pop-up window. If it works, you will also receive a test.txt 
file on the network storage server.

When completed, click Save to take effect and then click Close to quit this page. 
The new server name appears in the server drop-down list on the application 
page as below. To remove a server setting from the list, select a server name from 
the drop-down list and then click Delete. 

You can only delete an event setting when the setting is not active.