Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guida All'Installazione
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing Cisco ONS 15454 SONET/SDH TCC2
Cards
Cards
Product Names: 15454-TCC2
This document provides a card description, specifications, and an installation procedure for the Cisco
ONS 15454 SONET/SDH TCC2 card. As appropriate, use this document in conjunction with the Cisco
ONS 15454 Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide, the Cisco ONS 15454
Reference Manual or the Cisco ONS 15454 SDH Reference Manual, and the Cisco ONS 15454
Troubleshooting Guide or the Cisco ONS 15454 SDH Troubleshooting Guide when working with TCC2
cards.
ONS 15454 SONET/SDH TCC2 card. As appropriate, use this document in conjunction with the Cisco
ONS 15454 Procedure Guide or the Cisco ONS 15454 SDH Procedure Guide, the Cisco ONS 15454
Reference Manual or the Cisco ONS 15454 SDH Reference Manual, and the Cisco ONS 15454
Troubleshooting Guide or the Cisco ONS 15454 SDH Troubleshooting Guide when working with TCC2
cards.
This document contains the following sections:
•
•
•
•
•
TCC2 Card Description
The Advanced Timing Communications and Control (TCC2) card performs system initialization,
provisioning, alarm reporting, maintenance, diagnostics, IP address detection/resolution, SONET section
overhead (SOH) data communication channel/generic communication channel (DCC/GCC) termination, and
system fault detection for the ONS 15454. The TCC2 also ensures that the system maintains Stratum 3
(Telcordia GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
provisioning, alarm reporting, maintenance, diagnostics, IP address detection/resolution, SONET section
overhead (SOH) data communication channel/generic communication channel (DCC/GCC) termination, and
system fault detection for the ONS 15454. The TCC2 also ensures that the system maintains Stratum 3
(Telcordia GR-253-CORE) timing requirements. It monitors the supply voltage of the system.
Note
The TCC2 card requires Software Release 4.0.0 or later.