Cisco Cisco Video Surveillance 2600 Series IP Camera Guida All'Installazione

The Cisco Video Surveillance 2630 IP Dome, model CIVS-IPC-2630V is a 
high-resolution, feature-rich IP camera. It offers a wide dynamic ranges, dual 
streaming, motion detection, event notification, day/night operation, 24 VAC power, 
flexible mounting options, and many other features. It also supports external devices 
that trigger alarms and respond to alarms, and provides audio input and output.

The IP dome is vandal-resistant and includes an integrated heater and fan. It is 
designed to be mounted outdoors. Model CIVS-IPC-2630V includes a clear dome 
cover.

The Cisco Video Surveillance IP Dome package includes these items:

This Quick Start Guide (qty. 1)

Regulatory Compliance and Safety Information (qty. 1)

Camera with clear bubble (qty. 1)

Template for mounting (qty. 1)

0.9 mm Allen wrench for adjusting back focus (qty. 1)

TORX security screwdriver for tamper resistant TORX head screws (qty. 1)

8-32 x 5/16 inch screws (qty. 4)

Security wire and screw (qty. 1)

The following accessories are available for the 2630 IP Dome. You can order these 
accessories from Cisco or a Cisco partner.

Bubble, clear, 2500 and 2600 Series—Cisco part number CIVS-IPCA-1004=

Bubble, smoked, 2500 and 2600 Series—Cisco part number CIVS-IPCA-1005=

Conduit base spare with extra gaskets, 2500 and 2600 Dome 
series—CIVS-IPCA-1006=

Ceiling tile mount—CIVS-IPCA-1007=

Pendant cap—CIVS-IPCA-1010=

Wall mount (for use with pendant cap)—CIVS-IPCA-1011=

Ceiling mount (for use with pendant cap)—CIVS-IPCA-1012=

Pendant cap adapter—CIVS-IPCA-1013=

Round pole mount adapter—CIVS-IPCA-1014=

Audio video cables—CIVS-IPCA-1017=

Sun shield—CIVS-IPCA-1018=

Installing the IP dome involves mounting it by using a conduit case or a pendant. 
Mounting options include the following:

Conduit base mounting—Use this method with the optional conduit base in 
situations where you cannot cut a hole through a surface for cables or where 
cables run through a small hole in a surface

Pendant mounting—You can mount the 2630 IP dome to a wall with an optional 
pendant and wall mount assembly

The IP dome requires a connection to a network via a category 5 or higher network 
cable. The IP dome also requires power from a customer-supplied table-top or 
rack-mounted 24 VAC power supply. The 24 VAC source must be isolated from the 
ground (floating output).

In addition, you can use the following optional devices with the IP dome:

External speaker

External microphone

Up to two external input devices and up to two external output devices

For detailed information about installing, configuring, operating, administering, and 
troubleshooting the IP dome, see Cisco Video Surveillance IP Camera User Guide, 
Cisco Video Surveillance 2630 IP Dome, Model CIVS-IPC-2630V. This document is 
available at 

To request technical assistance, contact the Cisco Technical Assistance Center (TAC) 
in one of the following ways:

E-mail—tac@cisco.com

Phone—In North America: 800 553-2447
Outside North America: 408 526-7209