Cisco Cisco Catalyst 6500 Series 8700W Enhanced AC Power Supply Scheda Tecnica
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Applications
The 8700W enhanced AC power supply allows a Cisco Catalyst 6500 Series Switch to be remotely
power cycled or shut down even with no access to the console or CLI of the switch for
maintenance using an appropriate third-party relay controller, as shown in Figure 2. This feature
reduces the maintenance cost and improves mean-time-to-repair (MTTR).
Figure 2. Remote Power Cycle or Shutdown of Cisco Catalyst 6500 Series Switch Using the 8700W
Enhanced AC Power Supply
Features and Benefits
Table 1 lists the 8700W enhanced AC power supply features and benefits.
Table 1.
Features and Benefits
Feature
Benefits
PoE scalability
Supports up to 420 IEEE 802.3af Class 3 (15.4W) PoE devices in a single chassis with full
redundancy, thus reducing total cost of ownership for high-density PoE deployments in the
campus access layer.
redundancy, thus reducing total cost of ownership for high-density PoE deployments in the
campus access layer.
Remote power restart using
external relay controller
external relay controller
Remotely power cycles or shuts down the Cisco Catalyst 6500 Series Switch using any
appropriate third-party relay controller without needing access to the supervisor engine CLI,
thereby reducing maintenance costs and improving MTTR.
appropriate third-party relay controller without needing access to the supervisor engine CLI,
thereby reducing maintenance costs and improving MTTR.
Remote power restart using
Cisco IOS
Cisco IOS
®
Software CLI
Remotely power cycle or shut down the Cisco Catalyst 6500 Series Switch using the Cisco
IOS Software CLI, reducing maintenance costs and improving MTTR.
IOS Software CLI, reducing maintenance costs and improving MTTR.
Multiple input
Remote power cycle scales the system power depending on the need (scale as you grow)
with fully isolated inputs, providing flexibility.
with fully isolated inputs, providing flexibility.
Universal multiple (triple) input
(110–220VAC, 50–60Hz)
(110–220VAC, 50–60Hz)
Flexibility to provision circuits with either high-input voltage (200-220V) or low-input voltage
(100-120V) depending on availability and power output needs.
(100-120V) depending on availability and power output needs.
Compatible with 6-, 9-, and 13-
slot chassis
slot chassis
Investment protection: the 8700W enhanced AC power supply can be installed into existing
Cisco Catalyst 6500 Series Switch chassis: both E- and non-E series Cisco Catalyst 6500
Series Switch chassis.
Cisco Catalyst 6500 Series Switch chassis: both E- and non-E series Cisco Catalyst 6500
Series Switch chassis.
Note: Available power is limited to 4000W in Cisco Catalyst 6506 and 6509 Switches,
4500W in the Cisco Catalyst 6509-NEB-A Switch and 6000W in the Cisco Catalyst 6513
Switch. Full power available in the Cisco Catalyst 6506-E and 6509-E Switches.
4500W in the Cisco Catalyst 6509-NEB-A Switch and 6000W in the Cisco Catalyst 6513
Switch. Full power available in the Cisco Catalyst 6506-E and 6509-E Switches.
Hot swappable
Eliminates downtime when replacing power supply.
Mixed power supply operation
(along with lower capacity AC or
DC power supply)
(along with lower capacity AC or
DC power supply)
Eliminates downtime when upgrading to the new 8700W enhanced AC power supply.