Cisco Cisco Packet Data Gateway (PDG) Guida All'Installazione
Cabling the Switch Processor Input/Output Line Card
▀ Connecting to the Serial Console Port
▄ ASR 5000 Installation Guide
114
DB-9 to RJ-45 Adapter
SPIOs are shipped with an RJ-45-to-RJ-45 serial cable and an RJ-45-to-DB-9 adapter. The DB-9S conductor on the
adapter is female. If you use the cable and adaptor together, refer to the following figure and table.
adapter is female. If you use the cable and adaptor together, refer to the following figure and table.
Important:
If the console cable is to be used in a null-modem configuration, the workstation or terminal server
must provide a carrier-detect signal.
Figure 33. SPIO Console Cable and DB-9 Adapter Pinouts
Table 35.
SPIO Console Cable Pinouts
SPIO Console Port Interface
Console Cable
RJ-45-to-DB-9 Adapter
Signal
Signal Type
RJ-45 Pin
RJ-45 Pin
DB-9S Pin
Signal
Clear to Send (CTS)
Input
1
1
7
RTS
Data Set Ready (DSR)
Input
2
2
4
DTR
Receive Data (RxD)
Input
3
3
3
TxD
Signal Ground (SGND)
N/A
4
4
5
SGND
Ready To Send (RTS)
Output
5
5
8
CTS
Transmit Data (TxD)
Output
6
6
2
RxD
Data Carrier Detect (DCD)
Input
7
7
1
DCD
Data Terminal Ready (DTR)
Output
8
8
6
DSR