Cisco Cisco Packet Data Gateway (PDG) Guida All'Installazione
Replacing Application Cards
Determining Whether an Application Card has Failed ▀
ASR 5000 Installation Guide ▄
241
Using SNMP Traps
The system supports SNMP traps that are triggered when conditions indicate the need to replace an application card.
The system provides the traps listed in the table below.
The system provides the traps listed in the table below.
Table 83.
SNMP Traps for Application Cards
SNMP Trap
Description
starCardVoltageFailure
A voltage regulation failure has been detected in a card.
starCardBootFailed
A card has failed to start up properly. The card is not operational.
starCardFailed
The card has failed and is no longer operational.
starCardSWFailed
An unrecoverable software error has occurred on the card.
starCardPSCMigrateStart
A packet processing card migration operation has begun. The first varbind identifies
the packet processing card whose tasks are being migrated from; the second varbind
identifies the packet processing card where the tasks are being migrated to. If a
migration is taking place, it is likely that there is a problem with the original packet
processing card.
the packet processing card whose tasks are being migrated from; the second varbind
identifies the packet processing card where the tasks are being migrated to. If a
migration is taking place, it is likely that there is a problem with the original packet
processing card.
starCardPSCMigrateComplete
A packet processing card migration operation has successfully completed. The first
varbind identifies the packet processing card whose tasks are being migrated from;
the second varbind identifies the packet processing card to which the tasks are being
migrated.
varbind identifies the packet processing card whose tasks are being migrated from;
the second varbind identifies the packet processing card to which the tasks are being
migrated.
starCardPSCMigrateFailed
A packet processing card migration operation has failed. The first varbind identifies
the packet processing card whose tasks are being migrated from; the second varbind
identifies the packet processing card to which the tasks are being migrated.
the packet processing card whose tasks are being migrated from; the second varbind
identifies the packet processing card to which the tasks are being migrated.
starCardSMCSwitchoverStart
An SMC switchover operation has begun. The first varbind identifies the SMC
whose tasks are being switched from; the second varbind identifies the SMC where
the tasks are being switched to. If a migration is taking place, it is likely that there is
a problem with the original SMC.
whose tasks are being switched from; the second varbind identifies the SMC where
the tasks are being switched to. If a migration is taking place, it is likely that there is
a problem with the original SMC.
starCardSMCSwitchoverComplete An SMC Switchover has completed successfully. The starSlotNum varbind identifies
the new primary SMC.
starCardSMCSwitchoverFailed
An SMC switchover operation has failed. The first varbind identifies the SMC whose
tasks are being switched from; the second varbind identifies the SMC to which the
tasks are being switched.
tasks are being switched from; the second varbind identifies the SMC to which the
tasks are being switched.
If any of the above traps have been generated, it is likely that an application card needs to be replaced.