Cisco Cisco NSS030 Smart Storage External Power Adapter Manuale Di Manutenzione
Configuring the NAS for Active Directory Authentication
Joining the NAS to Your Domain
Cisco Small Business NSS300 Series Smart Storage Administration Guide
268
4
STEP 5
In the Server field, enter the hostname or IP address of the NTP server.
Make sure the time difference between the NAS and the domain controller is less
than five minutes. If time difference is greater than five minutes, Kerberos
Authentication fails and you cannot join the domain. To avoid this possibility, we
recommend you use the domain controller as the NTP server.
than five minutes. If time difference is greater than five minutes, Kerberos
Authentication fails and you cannot join the domain. To avoid this possibility, we
recommend you use the domain controller as the NTP server.
STEP 6
To save your settings, click Apply.
Configuring DNS Settings
To configure DNS settings for your NAS, follow these steps.
STEP 1
From the web-based configuration utility of your NAS, click Administration >
Network > TCP/ IP.
Network > TCP/ IP.
STEP 2
In the Primary DNS Server field, enter the IP address of the primary DNS server.
We recommend that you use the domain controller as the primary DNS server.
STEP 3
In the Secondary DNS Server field, enter the IP address of the secondary DNS
server.
server.
STEP 4
To save your settings, click Apply.