Cisco Cisco IOS Software Release 12.0(30)S
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services
Prerequisites for the PWE3 MIBs
2
Cisco IOS Release 12.0(30)S
•
•
•
•
•
Prerequisites for the PWE3 MIBs
•
SNMP must be enabled on the label switch routers (LSRs).
•
MPLS must be enabled on the LSRs.
•
Pseudowires must be configured with Ethernet or Frame Relay access circuits. (For more detailed
information, see the
information, see the
Networking Configuration Guide, Release 12.3.)
Restrictions for the PWE3 MIBs
This implementation of the PWE3 MIBs is limited to read-only (RO) permission for MIB objects except
for the cpwVcUp and cpwVcDown notification enable object, cpwVcUpDownNotifEnable, which, for
purposes of this release, has been extended to be writable by the SNMP agent.
for the cpwVcUp and cpwVcDown notification enable object, cpwVcUpDownNotifEnable, which, for
purposes of this release, has been extended to be writable by the SNMP agent.
•
The following tables in the PW-MIB are not supported in this release:
–
cpwVcPerfCurrentTable
–
cpwVcPerIntervalTable
•
The following objects in the PW-MPLS-MIB are not supported in this release:
–
cpwVcMplsOutboundIndexNext
–
cpwVcMplsInboundIndexNext
•
The following tables in the PW-ENET-MIB are not supported in this release:
–
cpwVcEnetMplsPriMappingTable
–
cpwVcEnetStatsTable
•
The following table in the PW-FR-MIB is not supported in this release:
–
cpwVcFrPMTable
Information About the PWE3 MIBs
To configure the PWE3 MIBs, you need to understand the following concepts:
•
•
•
•
•