Cisco Cisco UCS B440 M1 High-Performance Blade Server Guida All'Installazione
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco UCS B420 M3 Server Upgrade Guide for
Intel E5-4600 v2 Series CPUs
Intel E5-4600 v2 Series CPUs
Caution
You must follow the procedures in this guide when upgrading a Cisco UCS B420 M3 server to use Intel
E5-4600 v2 Series CPUs. Failure to follow these procedures might result in a non-bootable server.
E5-4600 v2 Series CPUs. Failure to follow these procedures might result in a non-bootable server.
This document describes the process for successfully upgrading a Cisco UCS B420 M3 server to use
Intel E5-4600 v2 Series CPUs. Downgrade scenarios are also covered.
Intel E5-4600 v2 Series CPUs. Downgrade scenarios are also covered.
The procedures in this guide support the following servers:
•
Cisco UCS B420 M3 blade server
Cisco UCS Blade Server
This section contains the following topics:
•
•
•
•
Minimum Software and Firmware Requirements
Cisco UCS B420 M3 Requirements
The minimum software and firmware versions required for the Cisco UCS B420 M3 server to support
Intel E5-4600 v2 Series CPUs are as follows:
Intel E5-4600 v2 Series CPUs are as follows: