Cisco Cisco NSS030 Smart Storage External Power Adapter

Release Notes for Cisco Smart Storage Optware PKG Package Version 0.99.163

Release Notes

the ipkg command. Also, if Optware is disabled from the NAS interface, the ipkg
utility will remain available until the NAS system is rebooted. The NAS system must
be rebooted for the disable action to take effect.

To enable the Optware PKG package:

STEP 1

Choose Applications > PKG Plugins > PKG Installed from the Navigation menu.
The PKG Plugins PKG INSTALLED window appears.

STEP 2

Click the graphical Optware icon to open the application.

STEP 3

Click Enable. The status changes to Enabled.

STEP 4

Click Close to exit.

After Optware is installed, you can SSH to the NAS system and use the command
“ipkg install <software name>” to install extra pre-compiled, hardware-dependent
software, such as GCC Compiler. Further instructions can be found in the “How to
Use iPKG” section at

http://www.nslu2-linux.org/wiki/Optware/Packages

To remove a Optware PKG package:

STEP 1

Choose Applications > PKG Plugins > PKG Installed from the Navigation menu.
The PKG Plugins PKG INSTALLED window appears.

STEP 2

Click on the Optware icon. The Optware application window appears.

STEP 3

Click Remove. The Optware PKG package is removed from the NAS.

Caveats

Information regarding any known caveats with Optware can be accessed from the
following website:

http://trac.nslu2-linux.org/optware