Cisco Cisco Packet Data Gateway (PDG)

Pagina di 4672
show srp   
▀  show srp info 
 
 
▄  Statistics and Counters Reference, StarOS Release 17  
4534 
   
show srp info 
Table 573. 
show srp info
 Command Output Descriptions 
Field
 
Description
 
Service Redundancy Protocol 
Context 
Displays the srp context configured for service redundancy protocol. Only one context may be 
configured with this service. 
Local Address 
Displays the local address of the chassis. 
Chassis State 
Displays the chassis state (init, standby or active). 
Chassis Mode 
Displays the chassis mode (primary or backup). 
Chassis Priority 
Displays the chassis priority. The chassis priority is an integer that determines which chassis is in the 
active state. The lower number has a higher priority. The priority must be an integer from 1 through 255. 
Default is 125. 
Local Tiebreaker 
Displays the MAC address which is used to determine priority when both chassis have the same priority 
and route modifier. The lower MAC address has the higher priority. 
Route-Modifier 
Displays the modifier which is used to determine which chassis has priority. The lower the number the 
higher the priority. 
Peer Remote Address 
Displays the IP address of the remote peer. 
Peer State 
Displays whether the peer is in the active or standby state. 
Peer Mode 
Displays the peer mode (standby or active). 
Peer Priority 
Displays the peer priority (primary or backup). 
Peer Tiebreaker 
Displays the peer MAC address. 
Peer Route-Modifier 
Displays the peer’s BGP route modifier. 
Last Hello Message 
received 
Displays a time stamp for the most recent hello message that was received. 
Peer Configuration 
Validation 
Displays the peer configuration validation. 
Last Peer 
Configuration Error 
Displays the most recent error that was received when the chassis was not able to validate its peer 
configuration. 
Last Peer 
Configuration Event 
Displays a time stamp for the last peer configuration event. 
Last Validate 
Switchover Status 
Displays whether both active and standby systems are ready for a planned srp switchover. 
Connection State 
Displays the status of the redundancy link between the two chassis. 
Next Peer Audit 
Scheduled 
Displays minutes and seconds until next audit.