Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
12
D1536502 Cisco
TelePresence
Using Extra
Loudspeakers and
Sound Reinforcement
All contents © 2016
Cisco Systems, Inc.
All rights reserved.
TelePresence
Using Extra
Loudspeakers and
Sound Reinforcement
All contents © 2016
Cisco Systems, Inc.
All rights reserved.
Appendix: Relevant API Commands
Where are the VU-meters?
To display the VU-meters, sign in to
the web interface of the codec, then
navigate to Setup > Peripherals and
then down to the microphone VU-
meters.
navigate to Setup > Peripherals and
then down to the microphone VU-
meters.
Sign in to the web interface and navigate to Setup > Configuration. For more API commands, see the API guide for your system.
Audio MicrophoneReinforcement Input Microphone [1..8] Mode
Description: Set the microphone reinforcement mode individually on each microphone. The signals from all microphones with Mode = On
will be mixed and fed to the selected MicrophoneReinforcement outputs. Also consult the Audio MicrophoneReinforcement Output Line Mode
setting.
will be mixed and fed to the selected MicrophoneReinforcement outputs. Also consult the Audio MicrophoneReinforcement Output Line Mode
setting.
Valuespace: On/Off (default)
On:
On:
The microphone signal will be fed to the selected MicrophoneReinforcement outputs, as well as to the far end.
Off: The microphone signal will be sent only to the far end. It will not be fed to the selected MicrophoneReinforcement outputs.
Audio MicrophoneReinforcement Output Line [1..4] Mode
Description: Set the microphone reinforcement mode individually on each line output. If Mode = On, the line output will add the microphone
reinforcement mix to its ordinary output signal. Also consult the Audio MicrophoneReinforcement Input Microphone Mode setting.
reinforcement mix to its ordinary output signal. Also consult the Audio MicrophoneReinforcement Input Microphone Mode setting.
Valuespace: On/Off (default)
On: This output will deliver far-end audio, local presentation audio and the microphone reinforcement mix.
Off: This output will deliver far-end audio and local presentation audio.
On: This output will deliver far-end audio, local presentation audio and the microphone reinforcement mix.
Off: This output will deliver far-end audio and local presentation audio.
Audio MicrophoneReinforcement Gain
Description: The gain (in dB) that will be applied to the mixed microphone signal that is fed to the selected MicrophoneReinforcement outputs.
Valuespace: Integer (-54..15); default: -54
Use this gain to adjust the level of microphone signal that should be fed to the local output. The value -54 means “Off”, and no signal will be
fed from the microphone to the output.
Use this gain to adjust the level of microphone signal that should be fed to the local output. The value -54 means “Off”, and no signal will be
fed from the microphone to the output.
Audio Input Microphone [1..8] Type
Description: Set the specified input as Line or Microphone. When set to Line the phantom voltage feeding will be turned off.
Valuespace: Line/Microphone
Audio Output Line [1..4] Delay DelayMs
Description: Set the delay to a specified value (milliseconds)
Valuespace: Integer (0..290)
Audio Output Line [1..4] Level
Description: Output gain in decibels.
Valuespace: Integer (–24..0)