Cisco Cisco TelePresence MX700 Manuale Di Manutenzione
4
D1536502 Cisco
TelePresence
Using Extra
Loudspeakers and
Sound Reinforcement
All contents © 2016
Cisco Systems, Inc.
All rights reserved.
TelePresence
Using Extra
Loudspeakers and
Sound Reinforcement
All contents © 2016
Cisco Systems, Inc.
All rights reserved.
Main loudspeakers
LAN
Local microphones
Touch 10
Display(s)
Extra loudspeakers
Presentation
source
(For clarity,
no camera
connections are
shown)
• Line outputs 1– 4 are standard
“speaker outputs” (line level)
that go through the volume
control.
• Line outputs 5 and 6 are
“record outputs” that contain
local microphones as well as far
end and program material.
Codec SX80: Use with Extra Loudspeakers
Connecting to the Codec
The illustration at left shows the
external connections needed.
Note that, for clarity, the camera
connections have been omitted.
Note that, for clarity, the camera
connections have been omitted.
The illustration shows a configuration
using passive loudspeakers and a
power amplifier. Active loudspeakers
power amplifier. Active loudspeakers
(with built-in power amplifiers) may, of
course, be used instead.
You may use any number of local
Your presentation source may be
connected using either HDMI or DVI. In
the latter case, audio must be provided
separately to the codec, as shown.
the latter case, audio must be provided
separately to the codec, as shown.
For clarity, the HDMI PC-input audio
alternative has been omitted in the
illustration of the internal signal paths
shown on the following page.
alternative has been omitted in the
illustration of the internal signal paths
shown on the following page.