Cisco Cisco UCS B440 M1 High-Performance Blade Server Manuale Tecnico
Windows 2012 NPIV on UCS Configuration
Example
Example
Document ID: 116471
Contributed by Felipe de Mello and Marcin Latosiewicz, Cisco TAC
Engineers.
Jul 21, 2014
Engineers.
Jul 21, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Live Migration
Quick Migration
Verify Live Migration
Troubleshoot
Common Problems
MPIO
Related Information
Prerequisites
Requirements
Components Used
Configure
Live Migration
Quick Migration
Verify Live Migration
Troubleshoot
Common Problems
MPIO
Related Information
Introduction
This document describes how to configure Windows Server 2012 N_Port ID Virtualization (NPIV) on Unified
Computing System (UCS) Version 2.1(2a). With this feature, a Virtual Machine (VM) that runs on a server
can share a single adapter, and still have independent access to its own protected storage.
Computing System (UCS) Version 2.1(2a). With this feature, a Virtual Machine (VM) that runs on a server
can share a single adapter, and still have independent access to its own protected storage.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Windows Fabric Network Interface Controller (fNIC) Driver Compatible with UCS Manager
(UCSM) Version 2.1(2)
(UCSM) Version 2.1(2)
•
UCSM Version 2.1(2) Virtual Interface Card (VIC) Firmware Image
•
UCSM Version 2.1(2) on Fabric Interconnect/ I/O Modules (IOMs)
•
Hyper−V 2012 and Windows 2012 Guests
•
Components Used
The information in this document is based on these software and hardware versions:
Hyper−V Version 3.0
•
Windows Server 2012
•
NetApp Storage
•
UCS Chassis, Fabric Interconnects, and B−Series Servers
•