Cisco Cisco MeetingPlace IP Gateway Manuale Tecnico

MeetingPlace Server IP Trunk Group Between an
Avaya Communication Server and a MeetingPlace
Server Configuration Example

Document ID: 51632

Contents

Introduction
Prerequisites
Requirements
Components Used
Conventions
Avaya Communication Manager Media Server Configuration
Limitations
Step 1: Establish the Node−Name IP Information
Step 2: Establish the IP Interfaces Information
Step 3: Establish the Display Signaling−Group Information
Step 4: Establish the Display Trunk Group Information
Step 5: Establish the Uniform Dialing Plan
Verify
Troubleshoot
Related Information

Introduction

This document provides information to help you configure the IP Trunk Group between the Avaya
Communication Server and the Cisco MeetingPlace Server.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco MeetingPlace IP Gateway versions 4.2.7.x and later.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.