Cisco Cisco UCS B440 M1 High-Performance Blade Server Guida Informativa
How do I determine which DIMM has triggered the
fault LED on a UCS B−Series Blade Server?
fault LED on a UCS B−Series Blade Server?
Document ID: 115901
Contributed by Andreas Nikas, Cisco TAC Engineer.
Feb 12, 2013
Feb 12, 2013
Contents
Introduction
How do I determine which DIMM has triggered the fault LED on a UCS B−Series Blade Server?
Related Information
Related Information
Introduction
This document describes how to use the DIAG SW switch on a Cisco UCS B−Series Blade Server in order to
determine which DIMM has triggered the front panel fault LED.
determine which DIMM has triggered the front panel fault LED.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Q. How do I determine which DIMM has triggered the fault LED on a UCS
B−Series Blade Server?
B−Series Blade Server?
A. Complete these steps in order to use the DIAG SW switch to determine which DIMM has
triggered the front panel fault LED on a UCS B−Series Blade Server:
triggered the front panel fault LED on a UCS B−Series Blade Server:
View the fault indicator LED on the front panel of the server in order to verify a fault
exists on the system.
exists on the system.
1.